DWL-650 rev K on RH9
robert at rkohler.com
Wed Aug 13 00:20:17 EDT 2003
Does your hostAP code work for the PCMCIA card 11Mb, DWL-650 rev K?
I found ref to DWL-650 working, but after installing, I found ref
to /etc/pcmcia/hostap.conf using rev D.
For my tests, I have been unable to get it to recognize a driver.
Here is what I have sone so far.
RH9 full install.
Recompiled kernel 2.4.20-19.9 without PCMCIA support.
Installed pcmcia-cs-3.2.4 .
Ran "make pccard"
Copied /etc/pcmcia/hostap.conf to /etc/pcmcia/config
as it appears this is what cardmgr reads.
Restarted pcmcia services via /etc/init.d/pcmcia restart.
Messages I get in /var/log/messages when inserting card
Aug 12 22:49:13 roblap kernel: O2Micro OZ6912 rev 00 PCI-to-CardBus at
slot 00:0a, mem 0xd0003000
Aug 12 22:49:13 roblap kernel: host opts : [pci/way] [pci irq 11]
[lat 64/176] [bus 3/3]
Aug 12 22:49:13 roblap kernel: PCI irq 11 test failed
Aug 12 22:49:13 roblap kernel: ISA irqs (default) = 3,4,7,9 polling
interval = 1000 ms
Aug 12 22:49:13 roblap cardmgr: watching 1 sockets
Aug 12 22:49:13 roblap cardmgr: starting, version is 3.2.4
Aug 12 22:49:14 roblap kernel: cs: cb_alloc(bus 3): vendor 0x104c,
device 0x8400Aug 12 22:49:14 roblap kernel: cs: could not allocate 4K
memory for CardBus socket 0
Aug 12 22:49:14 roblap cardmgr: unsupported card in socket 0
Aug 12 22:49:14 roblap cardmgr: no product info available
Aug 12 22:49:14 roblap cardmgr: PCI id: 0x104c, 0x8400
Does this mean my card uses diff drivers.??
I noticed on D-Link's web site, they have drivers for WinXP and stress
to NOT install the wrong DWL-650 driver rev. "D" vs. "K". They say this
does not work and may possibly damage card inoperatable...
Anyone know what kind of chipset this card has?
More information about the HostAP