evilbunny at sydneywireless.com
Mon Oct 28 00:45:50 EST 2002
Running the debian binary version of the ISC server, and it works fine
on the ethernet interface, as well as on the previous version of the
hostap drivers... I've added wlan0 to the startup script....
Ok at this point I'll eat my own words due to the fact that the debian
version if you add the interface to the startup script will be
overwritten by the instance loaded from /etc/default/dhcp...
Thanks anyways :)
PS side note: another neat example you can add for use of bridging is
to bridge 2 wireless interfaces, currently I have an SMC pcmcia nic
(built in antenna) and a dwl520 (external antenna slotted wave guide),
and i can roam between the 2 networks and not require IP changes
I'm using the 2 interfaces for inside/outdoor (and shared) networks...
evilbunny mailto:evilbunny at sydneywireless.com
http://www.cacert.org - Free Security Certificates
http://www.sydneywireless.com - Telecommunications Freedom
Monday, October 28, 2002, 4:26:54 PM, you wrote:
RF> I use DHCP on the head (as of a few days ago) and versions since the Sept
RF> crasher fix, it seems to work fine.
RF> What dhcp server are you using?
RF> Is the DHCP server running on the wlan interface? In my case it's not, I
RF> route/NAT my wireless into my wired segment so I run a dhcp relay agent
RF> which relays onto my master dhcp server (which registers the ip into the
RF> DNS) so I can use host names to route to the wireless box. Works like a
RF> dream and completely dynamic.
RF> I have used a local dhcp server bound to the wlan interface on the AP box
RF> when I was testing, that works fine as well. I use the ISC DHCP server.
RF> Mail me off the list if you want some more help. I don't really think you
RF> are having a hostap issue here (but you may, who knows).
RF> Rob Fowler - Sydney
RF> (p.s. I am in your wireless db as 'honeypot')
RF> ----- Original Message -----
RF> From: "evilbunny" <evilbunny at sydneywireless.com>
RF> To: <hostap at shmoo.com>
RF> Sent: Monday, October 28, 2002 4:00 PM
RF> Subject: DHCP
>> Hello hostap,
>> I've updated to the latest stable version of HostAP (as well as
>> the previous version) couldn't get DHCP addresses via that interface...
>> When I ngrep on the linux box, I can see the request coming in via
>> the wlan0 interface, but no response is being sent out, have I
>> stuffed the config, or anything similarly stupid or is this a bug
>> and I'm chasing my tail trying to track it down...
>> The May version was issuing dhcp addresses fine...
>> Also the September version made the cabletron card think it was
>> talking to a hermes based AP, and was showing the link test section
>> in the client... However this seems to be not happening in the
>> October release...
>> Best regards,
>> evilbunny mailto:evilbunny at sydneywireless.com
>> http://www.cacert.org - Free Security Certificates
>> http://www.sydneywireless.com - Telecommunications Freedom
-------------- next part --------------
A non-text attachment was scrubbed...
Size: 1966 bytes
Desc: S/MIME Cryptographic Signature
Url : http://lists.shmoo.com/pipermail/hostap/attachments/20021028/7390bb14/attachment.bin
More information about the HostAP