hostap & channel bonding
czoffoli at xmerlin.org
Wed Nov 13 13:02:35 EST 2002
Michael Smith ha scritto:
> On Wed, 13 Nov 2002, Christian Zoffoli wrote:
>>using different SSID client wlans works at 2Mbit/s and i have many
>>wlan0 IEEE 802.11-b ESSID:"xmerlin"
>> Mode:Master Frequency:2.412GHz Access Point: 00:02:6F:01:86:0A
>>wlan1 IEEE 802.11-b ESSID:"xmerlin2"
>> Mode:Master Frequency:2.437GHz Access Point: 00:02:6F:01:86:09
> Try using channels 1 & 11 instead of 1 & 6.
> I've never had a packet loss problem with 64-byte pings when the channels
> are 5 apart, but if you're sending lots of data out of two radios in close
> proximity, 1-6 isn't quite enough separation. Might be related to your
> problem (especially since you have txpower turned up to 10 on both
with 1 & 11 i noticed the same behaviour (client rate 2Mbit and many
packet loss) ...same with client rate of 1Mbit.
P.S. it seems impossible to change the bitrate on the ap side (forcing
it to a lower bitrate 5.5,2,1) ...why ?
More information about the HostAP